Tuesday, July 22, 2008
Flywheeling (9/4/2007)
Got some more work done on Saturday, before spending the rest of the week-end on Rob's Eagle project.....
Got the flywheel removed (no problem when you have the right tools!)...
The next step was the engine back plate, which came right off after after removing about 10 bolts.
Finally, I test-fit the engine on the engine stand. Took a little jiggering around of the arms to get them in the right positions. Once I had it on, however, there were gaps as the boltd I bought were a little long. So I have washers to fill in the spaces, and will probably remove the cylinder head before final attachment to the stand.
Got the flywheel removed (no problem when you have the right tools!)...
The next step was the engine back plate, which came right off after after removing about 10 bolts.
Finally, I test-fit the engine on the engine stand. Took a little jiggering around of the arms to get them in the right positions. Once I had it on, however, there were gaps as the boltd I bought were a little long. So I have washers to fill in the spaces, and will probably remove the cylinder head before final attachment to the stand.
# posted by Dan DiBiase @ 9:44 PM 
Subscribe to Posts [Atom]
